ELECTRIC CARS - FREE CHARGING IN PUNAT
Bottling plants have been produced and installed in accordance with the strictest safety standards. Nevertheless, it is a high-voltage devices with which users must be handled carefully and in accordance with the manufacturer's recommendations.
Bottling are exclusively intended for charging the appropriate electric-powered vehicles. When charging is allowed to use only appropriate cables suitable length. Various sockets on bottlers request of various power supply cables that allow appropriate switching vehicles. Some filling stations (primarily those that allow quick charging DC DC current) with the power cable already installed in the bottling plant. Users recommend that before using bottler good test site characteristics and to consult regarding the technical requirements (odgovajaući adapters and cables for charging on the vehicle), which must be met for safe charging of vehicles.
Charging time depends on several factors: first of all of the connected load and the current level of battery charge electric vehicles. For ultra fast bottling plants, which allow feeding direct current (DC) power from 50 kW and more, typical battery electric vehicles (up to 20 kWh) can be recharged in less than half an hour. In the standard bottling plants connection power up to 22 kW, charging takes place alternating current (AC) and charge the battery as possible from half an hour to several hours, in the case of lower connection power of 22 kW or larger capacity battery than the standard 20 kW. The previous practice of using electric vehicles has shown that users are more prone to frequent charging, wherever possible, not only when the battery is fully discharged.
Before using individual bottling, it is desirable to check its compatibility with electric vehicles. This can be easily done reviewing specifications individual bottling plants (especially on single socket bottling plants) on the map bottler. In doing so, you should primarily check the type of cable and connector on the side of your vehicle, which must match the outlet located at the bottling plant.
A significant number of publicly available filling station is equipped with electrical outlets, allowing for charging customers with single-phase or three-phase connections. Currently, our prevldavaju vehicles with single-phase connections, but in the near future is expected proliferation of vehicles mainly equipped three-phase connections. Filling stations with more socket types are higher now ready to accommodate all types of users.
Most filling stations not equipped with its own mains cable since most electric vehicles equipped with its own cable. Exceptions are fast filling stations, which allow feeding direct current - thereby the adapter installed in the bottling plant, and the cable is securely attached to the side of the bottling plant.
Currently filling the public fueling stations are still free for all users, but to expect that it will be in the near future, access to publicly available fueling stations, as well as download services charge to charge a market activity.